Elbow Mandrel Pushing With Hot Induction Mandrel Head Elbow Machine
Specifications of Elbow Mandrel Pushing With Hot Induction Mandrel Head Elbow Machine: 1. Production range: OD 21-1420mm 2. Radius: 1D, 1.5D, 2D 3.
Thickness: 3mm-100mm 4. Material: carbon steel 5. Drive type:
Hydraulic, Chain Design: Hydraulic pushing Hydraulic clamp cylinder
Automatic lifting material Medium Frequency heating system All
controllings are in one operation case.
Elbow hot forming machine is designed and constructed for
manufacturing the small radius (1D/1.5D) carbon steel elbows,alloy
steel elbows. Medium Frequency Steel Elbow Machine has various
designed ways, can be produce 2 piece of elbows in a time or
support producing of elbow as well as 180 degree bend. And also
sizes below 219mm, the machine can automatic working with our PLC
control system. These elbows are widely used in the connection of
the industrial pipelines for the Petrochemical , gas, oil pipes,
electrical power and food, etc
| Elbow size | outer diameter Φ25mm(1″)~Φ1420mm(56″) |
| Wall thickness | 5~120mm |
| Bent diameter | ≤3 |
| Bent degree | 22.5°,45°,90°,135° etc. |
| Hydraulic cylinder | 2/4sets |
Machine composition
| 1. machine base/frame |
| 2. Main cylinder and supporting plate |
| 3. pushing plate |
| 4. front supporting plate |
| 5. loading table |
| 6. induction coils and adjusting device |
| 7. medium frequency power supply |
| 8. electrical control system |
| 9. auxiliary equipment: hydraulic machine/ stamping moulds/pipe end
cutting machine/quality testing machine |
Elbow Mandrel Pushing With Hot Induction Mandrel Head Elbow Machine designed and constructed for manufacturing the small radius
(1D/1.5D) carbon steel elbows,alloy steel elbows. Medium Frequency
Steel Elbow Machine has various designed ways, can be produce 2
piece of elbows in a time or support producing of elbow as well as
180 degree bend. And also sizes below 219mm, the machine can
automatic working with our PLC control system. These elbows are
widely used in the connection of the industrial pipelines for the
Petrochemical , gas, oil pipes, electrical power and food, etc
Main features Elbow Mandrel Pushing With Hot Induction Mandrel Head Elbow Machine are as follows:
1. Induction hot forming machine is designed and manufactured in
strong steel integral framework,
which makes the machines in good appearance, stable performance and
high stability.
2. These machines have individual power system, electrical system
and PLC centralized control system.
3. There’re two kinds of heating methods to choose: IGBT (Insulated
Gate Bipolar Transistor) and KGPS.
