Diameter 426mm equal diameter carbon steel and stainless steel tee
making machine
Tee molding machine is used for carbon steel, stainless steel pipe
into a special hydraulic machine, suitable for a variety of
specifications of tee pipe fitting joint extrusion molding change
the position of the cylinder, can be processed and manufactured 90
degrees, 135 degrees and other angles of tee pipe joint.The
diameter of the tee is 21mm-630mm, and the wall thickness is
3mm-20mm.Hydraulic system of three-way forming machine is hydraulic
power mechanism installed on the top of the fuselage, by pump,
motor, cartridge valve integration block, fuel tank and other
components, the power mechanism includes oil filtration, oil
temperature oil level display and other devices.The output flow of
the main oil pump is constant power and can vary with the
pressure.The structure of the three-way forming machine is the
optimized design of the whole frame fuselage to ensure the
strength, the welding parts for non-destructive flaw detection,
after welding operation aging treatment, to ensure the complete
elimination of stress, equipment in use without deformation.Tee
machine is provided with T row groove under the slider and above
the work table for mounting the mold.The dead point lock device on
the slider is provided to prevent the slider from sliding.The power
mechanism is placed on the top of the machine, and the top of the
fuselage is provided with a safety platform and a fence.Slide guide
adopts non-recovery type automatic circulation thin oil ruiyu
sliding, and is equipped with oil box and fault display device.
| Specification | Unit | HYT-315 | HYT-500 | HYT-1000 | HYT-1500 | HYT-2000 | HYT-4000 |
| Tee OD range | lnch | 1~4 | 3~6 | 4~8 | 8~12 | 10~16 | 20~28 |
Master
cylinder | Normal force | KN | 3150 | 5000 | 10000 | 15000 | 20000 | 40000 |
| Work stroke | mm | 450 | 480 | 610 | 670 | 800 | 1200 |
| Go down speed | mm/s | 60 | 80 | 80 | 80 | 80 | 80 |
| Work forward speed | mm/s | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 |
| Return stroke speed | mm/s | 80 | 100 | 100 | 100 | 100 | 100 |
Side
cylinder | Normal force | KN | 3150 | 5000 | 8000 | 12500 | 18000 | 40000 |
| Work stroke | mm | 300 | 320 | 340 | 360 | 410 | 500 |
| Advance speed | mm/s | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 |
| Return stroke speed | mm/s | 60 | 60 | 60 | 60 | 60 | 60 |
Push-out
cylinder | Normal force | KN | 300 | 400 | 500 | 630 | 1500 | 2000 |
| Work stroke | mm | 300 | 300 | 400 | 450 | 550 | 700 |
Workbench
effective area | Right and left | mm | 550 | 750 | 900 | 1200 | 1400 | 1800 |
| Front and back | mm | 400 | 580 | 800 | 1000 | 1200 | 1500 |
| The max distance from slide block to workbench | mm | 190 | 250 | 370 | 460 | 520 | 650 |
| Center high of side cylinder | mm | 980 | 1100 | 1350 | 1800 | 1900 | 2500 |
| Motor power | KW | 30 | 45 | 74 | 110 | 220 | 330 |
Tee Elbow cold forming machine of model YSLT100A could be designed
and manufactured for manufacturing equal and reducing tees of sie
from 1/2" to 4" with thickness from SCH10 to XXS of stainless
steel, carbon steel, alloy steel, monel, nickel alloy, but the
normal model just will be designed and manufactured for
manufacturing maximum thickness up to SCH80.
