CE ISO standard tee cold forming hydulic automatic forming
machine
Tee machine is the production of tee machine, here the tee refers
to the metal tee, whether it is carbon steel, alloy steel,
stainless steel, and titanium alloy the company's production of tee
machine can be produced.The production of tee tee machine generally
has three kinds, hot draw tee machine, hot press tee machine, cold
squeeze tee machine.The characteristics of the hot draw tee machine
is that the cost is low, but the extracted branch is not high
enough, the need to weld a section of steel pipe.Hot pressing tee
machine this kind of technology must first in order to make the
wall thickness of the tee larger than SCH80 tee.
Cold extrusion tee machine, is also the most commonly used tee
production method, now the size of the production is
1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by
high efficiency, low defective rate, reasonable price,generally a
molding.
| Specification | Unit | HYT-315 | HYT-500 | HYT-1000 | HYT-1500 | HYT-2000 | HYT-4000 |
| Tee OD range | lnch | 1~4 | 3~6 | 4~8 | 8~12 | 10~16 | 20~28 |
Master
cylinder | Normal force | KN | 3150 | 5000 | 10000 | 15000 | 20000 | 40000 |
| Work stroke | mm | 450 | 480 | 610 | 670 | 800 | 1200 |
| Go down speed | mm/s | 60 | 80 | 80 | 80 | 80 | 80 |
| Work forward speed | mm/s | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 |
| Return stroke speed | mm/s | 80 | 100 | 100 | 100 | 100 | 100 |
Side
cylinder | Normal force | KN | 3150 | 5000 | 8000 | 12500 | 18000 | 40000 |
| Work stroke | mm | 300 | 320 | 340 | 360 | 410 | 500 |
| Advance speed | mm/s | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 |
| Return stroke speed | mm/s | 60 | 60 | 60 | 60 | 60 | 60 |
Push-out
cylinder | Normal force | KN | 300 | 400 | 500 | 630 | 1500 | 2000 |
| Work stroke | mm | 300 | 300 | 400 | 450 | 550 | 700 |
Workbench
effective area | Right and left | mm | 550 | 750 | 900 | 1200 | 1400 | 1800 |
| Front and back | mm | 400 | 580 | 800 | 1000 | 1200 | 1500 |
| The max distance from slide block to workbench | mm | 190 | 250 | 370 | 460 | 520 | 650 |
| Center high of side cylinder | mm | 980 | 1100 | 1350 | 1800 | 1900 | 2500 |
| Motor power | KW | 30 | 45 | 74 | 110 | 220 | 330 |
The whole structure of tee machine is introduced:
(1) the optimization design of the frame fuselage of the tee
machine ensures the strength of the machine. The welding parts
shall be tested nondestructive, and the aging treatment shall be
carried out after welding to ensure the complete elimination of
stress and no deformation in the use of the equipment.
(2) there are t-shaped slots under the slider and above the work
table for installing the mold.
(3) a dead point lock device is provided on the slider to prevent
the slider from sliding.
(4) the power mechanism is placed on the top of the machine, and
the top of the fuselage is provided with a safety platform and a
fence.
(5) the slide guide is lubricated by non-recovery type automatic
circulating thin oil, and is equipped with oil receiving box and
fault display device.
The hydraulic power mechanism of the tee machine is installed above
the fuselage, oil pump, motor, cartridge valve integration block,
fuel tank and other components, the power mechanism includes oil
filtration, cooling, oil temperature oil level display and other
devices.The main oil pump is a constant power input plunger pump,
and the output flow can vary with the pressure.Electrical control
system of tee machine: tee machine is equipped with an independent
electrical control cabinet, and the main operation button station
is suspended on the fuselage.Tee machine adopts PLC controller.The
tee electromechanical source is AC380V, the 50HZ control power
supply is AC220V, and the electromagnet power supply of each valve
is DC24V.The tee machine can produce carbon steel, alloy steel,
stainless steel, copper and so on.
