Q1245 CS SS Alloy Full Automatic Hydraulic Pipe Beveling Machine
Q1245 hydraulic electric slotting machine
Machine Tool profile:
Q1245 hydraulic electric groove machine is absorbing the advantages
of various kinds of pipe groove machine production and the users
need to design, suitable for 50 - Φ Φ 425 mm diameter and wall
thickness of 6-100 - mm seamless steel tube pipe groove processing.
This machine use standard power head restructuring has strong
cutting ability and special power differential radial feed box,
workpiece clamping using manual clamping device, also can use power
box host about manual adjustment and v-shaped holder to work
manually, adjust the up and down looking for are: pipe cutting
groove Angle head differential automatic feed used for machining,
when the pipe wall thickness is less than 12 mm also can be used in
a human hand mobile host with forming cutter cutting forming at a
time.
The machine is equipped with additional brackets and rolling
brackets. The pipe can be adjusted up and down to meet the
requirements of the center of various specifications of the steel
pipe and the bevel machine. The rise and fall of the supporting
roller on the brackets are manually operated.
The machine is safe, reliable, convenient and applicable to a wide
range of pipe end groove processing equipment.
Main technical parameters:
1. Motor power: N=4KW, N= 960rpm
2. Cutter speed: N =54-206rpm, six gears
3, processing range: the pipe diameter: Dr = Φ 50-425 mm Φ
Pipe wall thickness: S=6-100mm
4. Adjustment range of Angle knife rest: adjust arbitrarily between
0 and 35
5. Differential automatic feed speed: 0, 0.17mm/r
6. Manual axial movement speed: 18.8mm/r
Axial movement stroke: 200mm
7. Groove can be processed into: single V, double V, U and other
forms
8. Cutter plate diameter: 550mm
9. Center height of machine tool: H=1000mm
10. Weight of machine: G=2000Kg
11. Clamping method: hydraulic flat tightening
| Item | Name | Parameter | Unit | Note |
| 1 | Power unit | Motor power | 7.5 | Kw | Main motor |
| | Main axis rotate speed | 31,59,86,161 | Rpm | 4 Positions |
| | Cutter frame differential feed rate | 0,0.25,0.10 | Mm/r | 3 Positions |
| | Cutter frame electric feed rate | ±180 | Mm/r | Jogging/3 Positions |
| | Motor power | 0.37 | Kw | Cutter frame fast forward |
| 2 | Slide table | Lateral adjust | ±50 | mm | Manual |
| | Motor power | 1.5 | Kw | Axial fast forward |
| | Axial fast feed rate | ±302 | Mm/min | Jogging |
| | Axial working feed rate | ±1.45-14.5 | Mm/min | Frequency conversion adjust speed |
| | Motor power | 0.75 | Kw | Axial drive |
| | Longitudinal stroke | 50-400 | Mm/min | |
| 3 | Clamp platform | Clamp working table | 1500×1200 | mm | |
| | Clamp working table bearing | 10000 | Kg | |
| | Up and down adjust range | ±60 | mm | |
| | Up and down adjust speed | ±57 | Mm/min | |
| | Pinwheel reducer | BLD1.1-4-71 | | |
| 4 | Cutter head | Cutter head diameter | Φ850 | mm | |
| | Cutter frame angle adjust range | 0-37.5° | | |
| 5 | Process scope | Bevel diameter(pipe) | Φ159-Φ820 | mm | |
| | Bevel diameter(elbow) | Φ159-Φ700 | mm | |
| | Max process thickness | 150 | mm | |
| | Bevel type | Single V, Double V, U, etc | | According to operator |
| 6 | Machine size | Center height | 1150 | mm | |
| | Length | 3300 | mm | |
| | Width | 1600 | mm | |
| | Height | 1850 | mm | |
| | Weight | 5500 | Kg | |
