Large Diameter Steel Pipe Pipe Fitting Used Full Automatic Pipe
Beveling Machine
This machine tool is suitable for pipe fitting manufacturing and
pipe installation units in power station, petroleum, chemical
industry, shipbuilding and other industries. It is a key equipment
for pipe fitting manufacturing and pipe end groove processing
before pipe construction and welding.The groove machine can be
configured with different fixtures, which can process 820~ 1620
straight pipe and elbow, etc.The e knife disc is equipped with an
Angle tool holder, which can be machined with a wall thickness of
more than 14mm medium and high pressure pipelines;After adjusting
the position of the Angle tool holder according to different pipe
diameters, the differential mechanism drives the cutting
process.The clamping device adopts platform structure and flexible
clamping, which can expand the processing range and reduce the
deformation of pipe fitting.The pipe fitting alignment adopts the
method of moving the power head from left to right and electric
lifting up and down of the fixture platform;The electrical system
is used to centralize the operation of the machine on the operating
box, which is convenient and reliable.
1. Motor power: N=15KW
2. Cutter speed: n=19-132rpm, six gears
3. Processing scope: Pipe outer diameter 820-1620mm Pipe wall
thickness 10-50mm
4. Adjustment range of Angle knife rest: 0-37.5 degrees
5. Axial movement stroke: 400mm frequency conversion speed
regulation ±1.45-14.5 electric
6. Axial rapid feed: ±313mm/min electric
7. Fixture working platform: 2500x2000x150mm
8. Groove can be processed in the form of single V, double V, U
inner slope, etc
9. Diameter of knife disk: D=1620mm
10. Center height of machine tool: H=1495mm
| Pipe Dia applicable: | DN50-400 (φ60-426mm) | DN100-600(φ114-610 ) | DN200-800 (φ219-813 mm) |
| Pipe wall thickness applicable: | 4-90mm | 6-180mm | 6-180mm |
| Beveling speed: | ≤ 5min /pipe bevel (dn200 sch40) | ≤ 5min /pipe bevel (dn200 sch40) | ≤ 5min /pipe bevel (dn200 sch40) |
| Bevel angle of tool rest: | 0° ~45° | 0° ~45° | 0° ~45° |
| Parameter/model | YQ-89 | YQ-168 | YQ-325 | YQ-630 | YQ-820 | YQ-1020 | YQ-1800 | | Turning diameter(mm) | 21-89 | 89-168 | 168-325 | 325-630 | 630-820 | 820-1020 | 1020-1800 | | Revolution of cutter head(rpm) | 600 | 350 | 200 | 150 | 100 | 80 | 40 | | Feeding turn volume(mm/r) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
|
he beveling machine configurable different jig, can work Φ 800 - Φ 1574 (32-62)
straight pipe and elbow pipe groove;The knife plate is equipped with an Angle tool holder, which can be
machined with a wall thickness greater than 14mm.After adjusting the position of the Angle tool holder according to
different pipe diameters, the differential mechanism drives the
cutting process.The clamping device adopts platform structure and flexible
clamping, which can expand the processing range and reduce the
deformation of pipe fitting. After finishing one end of the
processing, loosen the working rotating lock block, manually rotate
the working table 90, and lock and adjust the middle end of the
processing. The machine can improve the working efficiency by
multiples.
This machine tool is suitable for pipe fitting manufacturing and
pipe installation units in power station, petroleum, chemical
industry, shipbuilding and other industries. It is a key equipment
for pipe fitting manufacturing and pipe end groove processing
before pipe construction and welding.The groove machine can be configured with different fixtures, which
can process 820~ 1620 straight pipe and elbow, etc.The e knife disc is equipped with an Angle tool holder, which can
be machined with a wall thickness of more than 14mm medium and high
pressure pipelines;After adjusting the position of the Angle tool holder according to
different pipe diameters, the differential mechanism drives the
cutting process.The clamping device adopts platform structure and flexible
clamping, which can expand the machining range and reduce the
deformation of pipe fitting
The pipe fitting alignment adopts the method of moving the power
head from left to right and electric lifting up and down of the
fixture platform;The electrical system is used to centralize the operation of the
machine on the operating box, which is convenient and reliable.Our company specializes in the production of large-scale electric
pipe groove machine and saw machine processing equipment, varieties
and specifications are complete, suitable for shipbuilding, power
engineering installation, petroleum, chemical, boiler plant,
metallurgy and steel industries.In case the customer has special processing needs, special
equipment may be made according to the actual production needs of
the customer.Our products are sold all over the world, with rich export
experience and perfect after-sales service.
