carbon steel and stainless steel tee cold forming machine from
China
Tee machine is the production of tee machine, here the tee refers
to the metal tee, whether it is carbon steel, alloy steel,
stainless steel, and titanium alloy the company's production of tee
machine can be produced.The production of tee machine generally has
three kinds, hot draw tee machine, hot press tee machine, cold
squeeze tee machine.
The characteristics of the hot draw tee machine is that the cost is
low, but the extracted branch is not high enough, the need to weld
a section of steel pipe.Hot pressing tee machine this kind of
technology must first in order to make the wall thickness of the
tee larger than SCH80 tee.
Cold extrusion tee machine, is also the most commonly used tee
production method, now the size of the production is
1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by
high efficiency, low defective rate, reasonable price, generally a
molding.
| Item | Unit | HYT-500A |
| Nominal Force | KN | 2500*2 |
| Return Force | KN | 405*2 |
| Slide stroke | mm | 900 |
| Opening Height | mm | 1400 |
| Hydraulic cushion nominal pressure | KN | 1000*2 |
| Hydraulic cushion return force | KN | 320*2 |
| Hydraulic cushion stroke | mm | 350 |
| The speed of the slipper | Idle stroke | mm/s | 200 |
| pressing | mm/s | 10-24 |
| return | mm/s | 140 |
| Cushion speed | Knock out | mm/s | 60 |
| Return | mm/s | 120 |
| Effective table size | LR | mm | 2200 |
| FB | mm | 1600 |
| Cushion size | LR | mm | 1720 |
| FB | mm | 1120 |
| Overall dimensions | LR | mm | 5000 |
| FB | mm | 2600 |
| Height | mm | 7150 |
| Power of motor | KW | 30*2 |
| Total weight | T | 70 |
tee machine is mainly oil pump, motor, PLC control box, water tank,
the corresponding model mold composition.Tee machine body belongs
to non-standard products, so there is no detailed specifications
and models, we can customize the tee machine according to the
customer's request.The diameter of the tee is 21mm-630mm and the
wall thickness is 3mm-20mm.
Mechanical tee and ordinary tee function difference.Mechanical tee
is divided into groove mechanical tee and screw mechanical tee.It
can be used to connect branch pipe directly on the steel pipe, and
has many applications on the device of fire pipe and spray pipe.In
demand for diversion or confluence can be used mechanical
tee.Device method first in the steel pipe with a hole opening
machine hole, and then the mechanical three card hole, hole by the
sealing ring along the wall of the tube.Mechanical three - way wire
connection and groove type two.When connecting the three mechanical
connections, the clearance between the three mechanical connections
and holes should be checked.Mechanical tee hole spacing shall not
be less than 1m.
