Automatic Dual Column Metal Hydraulic Cutting Band Saw Machine
What role does the stainless steel cutting fluid have in cutting
304?
Special stainless steel cutting fluid analytic practical everyday,
can often see the existence of stainless steel, stainless steel is
produced all kinds of products in the service of our life,
industrial development, the importance of stainless steel has been
self-evident, cutting fluid as a necessity in the manufacturing
process of stainless steel, as well as the characteristics of
stainless steel, special for this when choosing cutting fluid more
or less to pay attention to all aspects of performance.
Then this stainless steel cutting fluid can let you worry, cooling,
lubrication, permeability is very excellent, will not cause
corrosion to the workpiece.
1. In the process of cutting stainless steel workpiece, if not
suitable cutting fluid lead to constant wear artifacts, so not only
reduces the efficiency, greatly will also waste of resources, so it
can be very sure to tell you that you can try the tome of the
stainless steel cutting fluid, including special extreme pressure
lubricant additives, reduce tool wear, can greatly improve the
machining precision of workpiece and reduce the surface roughness;
Outstanding cooling and cleaning performance, good anti - rust.
Suitable for all kinds of stainless steel cutting, grinding
processing, also suitable for all kinds of difficult materials,
such as gold, aluminum and aluminum alloy cutting, grinding
processing, to ensure the rapid removal of metal processing debris,
better improve the work efficiency.
2. Stainless steel special features embodied in the large plastic,
in machining hardening, high hot strength, it will further increase
the cutting force, cutting stainless steel, it can be seen that the
required cutting fluid in cooling, lubrication, cleaning and so on
requirement is higher, the toughness of the stainless steel under
high temperature and high pressure prone to adhesion phenomenon,
the formation of cut tumor volume, the increase in tool wear at the
same time, also can appear because tear phenomenon leads to the
deterioration of the surface, therefore the stainless steel cutting
fluid can be fast cooling, effective cooling cutting tool and the
workpiece, also has a good cleaning performance, settlement of wear
debris, greatly improve the machining efficiency.
Artificial pulley moving axle into lifting material rack, lift move
material lifting oil cylinder to rise, the workpiece lift a little,
turn the handwheel moving axle, axle adjust length to correct
cutting position, after cutting position alignment, carried move
material gas cylinder, v-shaped around in a vise grip work, sawing
machine forward to cutting position, saw frame drop quickly, after
the stroke control mechanism from stroke touch block, quick turn
down work of sawing, sawing saw frame after rapid rise, sawing
machine back, left and right V vice loosen, axle shelved in lift
move material rack, artificial lift after discharge, the second
root material into, for the next cycle.
| Type | GZ 4280 |
| Cut capcity W*H (mm) | round 800 |
| square 800*800 |
| Bundle cutting W*H (mm) | / |
| / |
| Saw belt size(mm) | 8800*67*1.6 |
| belt line speed(m/min) | 40/60/80 (frequency control available) |
| Main generator power(kw) | 7.5 |
| Hydraulic generator power(kw) | 2.2 |
| Cooling generator power (kw) | 0.12 |
| Working clamp style | Hydraulic |
| Saw belt tighten style | Hydraulic |
| Main transmit structure | Turbine |
| Loading style | Extra roller |
| Packing dimensions(mm) L*M*H | 4200*2100*2650 |
| Weights of machine (kgs) | 11800 |
