Semi-automatic bandsaw Pipe Cutting metal Band Sawing machine
1. Those who have no experience in operating the machine tool are
not allowed to operate the machine tool.
2. Start the machine and listen to the sound. Tighten all screws.
3. It is absolutely not allowed to cut the saw blade violently /
quickly / suddenly. The cutting should be very slow, or the
operator will compensate for the damage of the saw blade!!!!
4. Turn off the power before commissioning. The replacement of saw
blade must be carried out by experienced personnel, otherwise the
damage of saw blade shall be compensated by the operator!!!!
5. Stop the machine when removing chips and placing workpieces.
Cover the cover when the sawing machine is running
6. According to the size, shape and hardness of the workpiece,
adjust the speed, feed and processing range appropriately.
7. If the saw blade is not used, it shall be loosened to extend the
service life of the saw blade.
8. If it is not needed for half a day, the power shall be cut off
immediately to protect the motor and extend its service life. A
kind of
9. Add proper amount of coolant, do not block the overflow hole,
otherwise the water pump will burn out, and make compensation
according to the price!!! Awesome
10. when using the new saw blade, the running force and feed rate
should be run at low speed.
| Type | GZ 4260 |
| Cut capcity W*H (mm) | round 600 |
| square 600*600 |
| Bundle cutting W*H (mm) | / |
| / |
| Saw belt size(mm) | 6800*41*1.3 |
| belt line speed(m/min) | 40/60/80 (frequency control available) |
| Main generator power(kw) | 5.5 |
| Hydraulic generator power(kw) | 2.2 |
| Cooling generator power (kw) | 0.12 |
| Working clamp style | Hydraulic |
| Saw belt tighten style | Hand |
| Main transmit structure | Turbine |
| Loading style | Extra roller |
| Packing dimensions(mm) L*M*H | 3200*1400*1850 |
| Weights of machine (kgs) | 3760 |
