We Supply Pipe Fitting Mould Die Sr Elbow Mandrel Head Sr Elbow Calibration
Mould and all kinds of corresponding molds and dies for all our Pipe
fittings Machine. The mandrel and corresponding induction coil for
elbow forming machine. The mandrel is mainly engineered from 18-8,
2520, K18, stainless steel and alloy steel. It allows for
production of pipe elbows with diameter between 21 and 1,620mm,
curvature radius of 1D-3D, and wall thickness of 5-80 mm.
The mandrel for Pipe Fitting Mould Die Sr Elbow Mandrel Head Sr Elbow Calibration
Mould comes with an ox horn shape, and is necessary during the hot
forming process. Due to the special shape design, it enables
diameter expanding while creating the bending.
Our Pipe Fitting Mould Die Sr Elbow Mandrel Head Sr Elbow Calibration
Mould and elbow mandrel head materials are generally ZG1Cr18Ni9Ti,
ZG3Cr20Ni14, ZG1Cr25Ni20Si2, ZG0Cr20Ni25, etc., the high
temperature strength and wear resistance have gradually increased,
and the price has also increased accordingly.
Pushed elbow mandrel head is divided into single curvature, double
curvature and multiple curvature according to the radius of
curvature.
For single-curvature, double-curvature, and multi-curvature
mandrels, the thrust force is gradually reduced, and the production
cost is gradually increased. According to the cross-sectional
shape, it is divided into two types: circular cross section and
elliptical cross section. The circular cross section is simple to
make and the cost is low, but the ellipticity and thinning rate of
the elbow are too large. Different, the ellipse and thinning rate
of the push elbow are small.
Heiyan chose a mandrel with an oval cross section. According to
whether or not there is a shaping section, it is divided into a
mandrel head with a shaping section and a mandrel head without a
shaping section. The Pipe Fitting Mould Die Sr Elbow Mandrel Head Sr Elbow Calibration
Mould mandrel with shaped section is complicated to manufacture, high
cost and long use time; the mandrel without shaped section is
simple to manufacture and low cost.
Our Pipe fitting Mould Die are use for part our pipe fitting manufacturer machines below:Hot Induction Elbow Machine
Hot Induction Bending Machine
Pipe Expanding Machine
Cold Forming Tee Machine
Cold Forming Elbow Machine
Hydraulic Press Machine
Pipe Bevel Machine
Band Saw Cutting Machine
Sand Blasting Machine
Medium Frequency Power Source
And also Pipe Fittings and all Dies and Mandrels
