We Supply Elbow Tee pipe fitting forming mould shaping mould dies and
mandrels and all kinds of corresponding molds and dies for all our Pipe
fittings Machine. The mandrel and corresponding induction coil for
elbow forming machine. The mandrel is mainly engineered from 18-8,
2520, K18, stainless steel and alloy steel. It allows for
production of pipe elbows with diameter between 21 and 1,620mm,
curvature radius of 1D-3D, and wall thickness of 5-80 mm.
The mandrel for Elbow Tee pipe fitting forming mould shaping mould dies and
mandrels comes with an ox horn shape, and is necessary during the hot
forming process. Due to the special shape design, it enables
diameter expanding while creating the bending.
The main products include Φ108-Φ1420 thermal expansion steel pipe
core rod, Φ18-Φ1219 push elbow core rod, Φ219-Φ2020 steel butt
welding elbow mold, Φ18-Φ914 elbow mold (elbow core rod),
Φ219-Φ1219 Pressure tee mold, Φ25-Φ1219 reducer pipe mold,
Φ159-Φ630 cold push stainless steel mold. The main raw materials
for production are stainless steel scrap, carbon steel scrap,
non-ferrous metals and other auxiliary materials.
| Parts Specifications of Our Pipe Expanding and Pipe Fitiings Mould |
| Material | 2520 ,2014, 304,45# steel ,40# steel,47# steel |
| Size | 27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm
,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm
,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm
,1118mm ,1168mm ,1219mm |
| Pipe Fitiings Mould Type | Elbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die
,Pipe expanding Mould Die |
The Elbow Tee pipe fitting forming mould shaping mould dies and
mandrels mandrel with shaped section is complicated to manufacture, high
cost and long use time; the mandrel without shaped section is
simple to manufacture and low cost.
And the mandrel and Elbow Tee pipe fitting forming mould shaping mould dies and
mandrels material used in our factory has the characteristics of wear
resistance, bending resistance and strong impact resistance, and
the surface is bright and clean, suitable for the extrusion of
copper, iron, aluminum, zinc, stainless steel and other metals.
Advantage of Elbow Tee pipe fitting forming mould shaping mould
dies and mandrels are as follows:
*Economic and practical, long life of core rod material.
*The core rod material processing technology is simple. Compared
with steel molds, no direct heat treatment is required for direct
polishing. Therefore, the heat treatment cost is reduced, the mold
processing time is shortened, and the number of stretching times
can be reduced and the cost of the mold can be reduced.
*High hardness and abrasion resistance surpasses the die steel, and
does not strain the surface of the machined part.
*Compared with steel molds, it has good thermal conductivity and
does not stick to molds, which can ensure uniform mold *temperature
distribution during work, will not cause mold cracks due to local
high temperature, and will not cause cold sweat, *exfoliation, and
wrinkles in stretched products. phenomenon.
