Water Cooling Medium Frequency Power Source For Heating Induction Equipment

The power factor reaches 0.99 under the condition of full power output. The integrated circuit board is adopted and the current and voltage are adjusted internally. The core components are high performance, high density and large-scale ASIC integrated circuit produced in the United States, which are digitized. The rectifier trigger part does not need any adjustment, and has the advantages of high fraud reliability, high pulse symmetry, strong anti-interference ability and fast response speed.

Technical specification of Medium Frequency Power Sourse for Heating Induction Equipment:

Medium Frequency Power Sourse for Heating Induction Equipment

Induction Heater Parameter of Medium Frequency Power Sourse for Heating Induction Equipment:

Features of Medium Frequency Power Sourse for Heating Induction Equipment:

1) Wide frequency tracking range:0.2kHz-600kHz

2) The load adaptation range is wide : series resonance is not afraid of no load , parallel resonance is not afraid of heavy load

3) Intelligent protection function: power regulation range 1%-100%, superior to most domestic manufacturers.

4) Intelligent protection function: with overvoltage, overcurrent, overfrequency, overheating, leakage and other restrictive protection functions, but also with water pressure, lack of phase, short circuit and other conventional hardware protection functions, all faults can be remembered

5)adopt Rital cabinet , equipped with IP54 protection grade and equipped with industrial temperature and humidity adjustment air conditioning,signal transmission by optical fiber to effectively avoid the temperature, humidity, electromagnetic interference caused by power fluctuations and faults.

6)100% success rate of startup: 100% success rate of starting equipment under any working condition

7)High startup speed: equipment startup to maximum power stable output time less than 0.15 seconds, much faster than traditional equipment startup time of 1-2 seconds

8)Good repetition consistency: all digital power control, Power resolution can be achieved 0.25‰,through the touch screen directly input set power, can avoid the traditional equipment with analog potentiometer to adjust the power caused by power fluctuations

9)Multifunctional extended interface: easy to connect with machine tool production line and digital communication interface, can realize centralized control of industrial field.

Advantages of our Medium Frequency Power Sourse for Heating Induction Equipment:

1. Big reactor design:

Strong filtering ability, greatly reduce harmonic pollution to the grid, suppress the current mutation, protect the transformer.

2. Large section area of current carrying discharge:

Select 8×60 copper row, large cross-sectional area, strong current carrying capacity, reduce heat.

3. Cabinet uses RITTAL brand:

Durable and beautiful

4. Appliances: SCHNEIDER brand

5. Button: IDEC brand

6. Insulating plate:Durable and high insulation grade, beautiful

7. Water segregator: Stainless steel

8. Cooling water pipe: Specially customized, high temperature and high pressure

9. Inverter increase resistance and capacity absorption: it can effectively suppress the instantaneous oscillation and high-frequency current of operating overvoltage, so that the waveform of overvoltage becomes slow, the steepness and amplitude are reduced, plus the damping effect of resistance, so that the high frequency oscillation rapidly attenuates

Hei Yan Group Covers the following R&D abilities :

1. PLC induction pipe bending machine,
2. Cold forming tee machine
3. Automatic Hot forming elbow machine
4. hydraulic pipe expanding machine
5. Bevel machine
6. Hydraulic press machine.
7. Cold elbow forming machine
8. Bandsaw machine
9. Medium Frequency power source
10. Shot Blast Machine
11. Pipe fittings dies&mandrels
12. Steel pipe fittings