Hot Induction Pipe Bending Machine Use Medium Frequency Power
Source
Production Description / Brief Introduction of Hot Induction Pipe
Bending Machine Use Medium Frequency Power Source:
1) Turn on and turn off easily,and power failure.
2) Adopt constant power to control the circuit, maintain constant
power while malting, and keep faster melting rate.
3) Set up over voltage, over current and water deficient protector,
and run safely.
4) The motherboard adopts CAD technology, integrated circuit board,
low-fault-rate, easy-manipulating,effortless maintenance.
5) Zero voltage starts up softly, high initial over, no impact for
the electric network.
6) Apply to melting ferrous metal and non-ferrous metal like
copper, aluminum, brass, steel,iron,stainless steel etc...
The Specification of our Hot Induction Pipe Bending Machine Use
Medium Frequency Power Source:
| Power | Input Power | Output Power | Cool Water | Cooling | Out-Dimension | Weight |
| Model | (V) | (KW) | (T/h) | Water Pressure | (mm)(L×W×H) | (KG) |
| | | | (Mpa) | | |
| KGPS60 | 380 | 60 | 2.5 | 0.25 | A750×800×1980 | 400 |
| KGPS100 | 380 | 100 | 3 | 0.25 | A750×800×1980 | 480 |
| KGPS160 | 380 | 160 | 5 | 0.3 | B750×800×1980 | 600 |
| KGPS250 | 380 | 250 | 5 | 0.3 | B-1400×800×1980 | 700 |
| KGPS400 | 380 | 400 | 6 | 0.4 | C-1800×800×1980 | 850 |
| KGPS500 | 380 | 500 | 6 | 0.4 | C-1800×800×1980 | 1000 |
| KGPS750 | 380 | 750 | 8 | 0.4 | C-1800×800×1980 | 1250 |
| KGPS1000 | 380 | 1000 | 10 | 0.4 | D-2200×800×2100 | 1250 |
| KGPS1500 | 380 | 1500 | 12 | 0.4 | E-3600×800×2100 | 1750 |
| KGPS2000 | 380 | 2000 | 18 | 0.4 | E-3600×800×2100 | 2000 |
| KGPS2500 | 380 | 2500 | 20 | 0.4 | E-3600×800×2100 | 2500 |
| KGPS3200 | 380 | 3200 | 35 | 0.4 | E-3600×800×2100 | 2800 |
| KGPS6500 | 380 | 6500 | 50 | 0.4 | F-5200×800×2100 | 3500 |
| Other customized specifications are welcomed. |
APPLICATIONS of our Hot Induction Pipe Bending Machine Use Medium Frequency Power
Source:
Electric Board
Main control circuit board as the main part of the machine, we made
in their research and development, and adopted by the company and
built since the automatic welding and testing equipment to ensure
that each set of machine can achieve the best effect, and we have
main control board in stock lone time, can satisfy the parts supply
problems.
Induction coils
The induction coil inside the furnace body is treated with two
insulations. The first spray of high temperature insulation paint.
The second round of glass fiber tape. The service life of the
treated furnace lining and induction coil will increase by more
than two times.
NOTE:
Please do not touch any exposeed electric components and induction
coils when it is starting work .Please close system if repair or
moving . Refuse electrocute!
