Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender Basic Introduction:
HY Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender is a kind of mandrel used for pipe expansion and extubation, and a
mandrel mold that promotes the forming of steel pipes.
The hot-expanded steel pipe forming process uses a special pipe
expanding machine, a core mold (commonly known as a mandrel) and a
heating device (commonly known as a heating coil), so that the
blank set on the mold is moved forward by the pusher, and is moved
during the movement. Process of heating and expanding. The diameter
of the used pipe is smaller than the diameter of the pipe to be
obtained. The deformation process of the blank is controlled by the
core mold, so that the compressed metal at the inner arc flows to
compensate for other parts that are thinned due to the diameter
expansion, so that the wall thickness is uniform. Heat expanded
steel pipe.
Performance characteristics of our Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender:
The hot-expanded steel pipe forming process has the characteristics
of beautiful appearance, uniform wall thickness and continuous
operation, which is suitable for mass production. Therefore, it has
become the main forming method for carbon steel, alloy steel and
stainless steel pipe expansion. The opposite process is extubation.
The thicker steel pipe is drawn into a thinner pipe by a process,
and the steel pipe produced by this process is called drawing pipe.
Materials are carbon steel, stainless steel and alloy steel. After
the steel pipe undergoes the thermal expansion process, its
material is unchanged. Welded pipes and seamless pipes can be
applied to this process!
The main products except our Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender include Φ108-Φ1420 thermal expansion steel pipe core rod,
Φ18-Φ1219 push elbow core rod, Φ219-Φ2020 steel butt welding elbow
mold, Φ18-Φ914 elbow mold (elbow core rod), Φ219-Φ1219 Pressure tee
mold, Φ25-Φ1219 reducer pipe mold, Φ159-Φ630 cold push stainless
steel mold. The main raw materials for production are stainless
steel scrap, carbon steel scrap, non-ferrous metals and other
auxiliary materials. The push elbow mandrel is a kind of mandrel
for push elbow forming, which can be used to expand the diameter at
high temperature to push out large diameter carbon steel, alloy
steel and non-ferrous metals with certain curvature Sew elbows or
bends. This Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender mandrel was originally easy to obtain, low in cost, fast in
heating, not easy to break, and long in life, saving energy. This
mandrel can be used for one-time diameter expansion and molding,
with good output quality, and no manual shaping is required.
HY tube expanding Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender mandrel is a mold installed on the tube expanding pusher. This
core mold (commonly known as mandrel) and heating device (commonly
known as heating coil) are used to make the blank set on the mold
pushed by the pusher. Downward movement, the process of being
heated and expanded during the movement. The diameter of the used
pipe is smaller than the diameter of the pipe to be obtained. The
deformation process of the blank is controlled by the core mold, so
that the compressed metal at the inner arc flows to compensate for
other parts that are thinned due to the diameter expansion, so as
to obtain uniform wall thickness Heat expanded steel pipe.
Advantage of Alloy Straight Mandrel Pipe Fitting Mould Die For Pipe Expanding
Pipe Bender:
The mandrel is designed to withstand considerable thrust when
working,
Good temperature and abrasion resistance;
Geometric design and manufacturing with high accuracy,
The quality of the produced steel pipes is well received and
trusted by customers!
| Parts Specifications of Our Pipe Expanding and Pipe Fitiings Mould |
| Material | 2520 ,2014, 304,45# steel ,40# steel,47# steel |
| Size | 27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm
,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm
,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm
,1118mm ,1168mm ,1219mm |
| Pipe Fitiings Mould Type | Elbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die
,Pipe expanding Mould Die |
Our Pipe fitting Mould Die are use for part our pipe fitting manufacturer machines below:
Hot Induction Elbow Machine
Hot Induction Bending Machine
Pipe Expanding Machine
Cold Forming Tee Machine
Cold Forming Elbow Machine
Hydraulic Press Machine
Pipe Bevel Machine
Band Saw Cutting Machine
Sand Blasting Machine
Medium Frequency Power Source
And also Pipe Fittings and all Dies and Mandrels
