Medium Frequency Welding Heating Induction Equipment Push Elbow
Production Description of Medium Frequency Welding Heating Induction Equipment Push Elbow
The motherboard adopts CAD technology, integrated circuit board,
low-fault-rate, easy-manipulating,effortless maintenance.
Zero voltage starts up softly, high initial over, no impact for the
electric network.
Apply to melting ferrous metal and non-ferrous metal like copper,
aluminum, brass, steel,iron,stainless steel etc...
Turn on and turn off easily,and power failure.
Adopt constant power to control the circuit, maintain constant
power while malting, and keep faster melting rate.
Set up over voltage, over current and water deficient protector,
and run safely.
Medium Frequency Welding Heating Induction Equipment Push Elbow
Technical Parameter :
| Power | Input Power | Output Power | Cool Water | Cooling | Out-Dimension | Weight |
| Model | (V) | (KW) | (T/h) | Water Pressure | (mm)(L×W×H) | (KG) |
| | | | (Mpa) | | |
| KGPS60 | 380 | 60 | 2.5 | 0.25 | A750×800×1980 | 400 |
| KGPS100 | 380 | 100 | 3 | 0.25 | A750×800×1980 | 480 |
| KGPS160 | 380 | 160 | 5 | 0.3 | B750×800×1980 | 600 |
| KGPS250 | 380 | 250 | 5 | 0.3 | B-1400×800×1980 | 700 |
| KGPS400 | 380 | 400 | 6 | 0.4 | C-1800×800×1980 | 850 |
| KGPS500 | 380 | 500 | 6 | 0.4 | C-1800×800×1980 | 1000 |
| KGPS750 | 380 | 750 | 8 | 0.4 | C-1800×800×1980 | 1250 |
| KGPS1000 | 380 | 1000 | 10 | 0.4 | D-2200×800×2100 | 1250 |
| KGPS1500 | 380 | 1500 | 12 | 0.4 | E-3600×800×2100 | 1750 |
| KGPS2000 | 380 | 2000 | 18 | 0.4 | E-3600×800×2100 | 2000 |
| KGPS2500 | 380 | 2500 | 20 | 0.4 | E-3600×800×2100 | 2500 |
| KGPS3200 | 380 | 3200 | 35 | 0.4 | E-3600×800×2100 | 2800 |
| KGPS6500 | 380 | 6500 | 50 | 0.4 | F-5200×800×2100 | 3500 |
| Other customized specifications are welcomed. |
APPLICATIONS of our Medium Frequency Welding Heating Induction Equipment Push Elbow:
A. Heating (hot forging, hot fitting and smelting):
B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials
through the heat treatment to work pieces. Detail applications are
stated as follows:
C. Welding (braze welding, silver soldering and brazing)
It mainly aims to melt the solder by heating it to a certain
temperature for the purpose of connecting two types of metals of
the same material and different
D. Annealing (tempering and modulation)
Electric Board
Main control circuit board as the main part of the machine, we made
in their research and development, and adopted by the company and
built since the automatic welding and testing equipment to ensure
that each set of machine can achieve the best effect, and we have
main control board in stock lone time, can satisfy the parts supply
problems.
Induction coils
The induction coil inside the furnace body is treated with two
insulations. The first spray of high temperature insulation paint.
The second round of glass fiber tape. The service life of the
treated furnace lining and induction coil will increase by more
than two times.
Features of the our Medium Frequency Welding Heating Induction Equipment Push Elbow :
• Easy operation:
A full time operator specially for power supply is not needed
.There is only one switch for turning on or off and one power
adjustment knob. After started, the only thing that needs to be
done is rotating the power adjustment knob to the largest location,
others are controlled by the device itself.
• Safety protection functions of induction melting furnace:
1. The main circuit and short circuit protection
2. SCR overvoltage protection
3. Main circuit phase fault protection
4. The main circuit phase loss protection
5. Low water pressure protection
6. SCR overcurrent protection
• Highly reliable electrical control board
In the operation, the 3-phase current is balanced. Due to the
advanced design, the 3-phase power supply's sequence could be
connected randomly. Moreover there is no limit to connect to
capacitor cabinet and furnace. All of these jobs can be judged to
be adapted automatically by the device itself. It makes the
installation and maintenance very easily.
Advantages of Our Heiyan Medium Frequency Welding Heating Induction Equipment Push Elbow
1. Energy saving:
The power factor reaches 0.99 under the condition of full power
output. The integrated circuit board is adopted and the current and
voltage are adjusted internally. The core components are high
performance, high density and large-scale ASIC integrated circuit
produced in the United States, which are digitized. The rectifier
trigger part does not need any adjustment, and has the advantages
of high fraud reliability, high pulse symmetry, strong
anti-interference ability and fast response speed.
2. Big reactor design:
Strong filtering ability, greatly reduce harmonic pollution to the
grid, suppress the current mutation, protect the transformer.
3. Large section area of current carrying discharge:
Select 8×60 copper row, large cross-sectional area, strong current
carrying capacity, reduce heat.
4. Cabinet uses RITTAL brand:
Durable and beautiful
5. Appliances: SCHNEIDER brand
6. Button: IDEC brand
7. Insulating plate:Durable and high insulation grade, beautiful
8. Water segregator: Stainless steel
9. Cooling water pipe: Specially customized, high temperature and
high pressure
10. Inverter increase resistance and capacity absorption: it can
effectively suppress the instantaneous oscillation and
high-frequency current of operating overvoltage, so that the
waveform of overvoltage becomes slow, the steepness and amplitude
are reduced, plus the damping effect of resistance, so that the
high frequency oscillation rapidly attenuates.
NOTE:
Please do not touch any exposeed electric components and induction
coils when it is starting work .Please close system if repair or
moving . Refuse electrocute!
