Large diameter thick wall straight seam machine for carbon steel
and stainless steel tee machine
Tee machine is the production of tee machine, here the tee refers
to the metal tee, whether it is carbon steel, alloy steel,
stainless steel, and titanium alloy the company's production of tee
machine can be produced.The production of tee tee machine generally
has three kinds, hot draw tee machine, hot press tee machine, cold
squeeze tee machine.
The characteristics of the hot draw tee machine is that the cost is
low, but the extracted branch is not high enough, the need to weld
a section of steel pipe.Hot pressing tee machine this kind of
technology must first in order to make the wall thickness of the
tee larger than SCH80 tee.
Cold extrusion tee machine, is also the most commonly used tee
production method, now the size of the production is
1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by
high efficiency, low defective rate, reasonable price,generally a
molding.
| Item | Unit | HYT-500A |
| Nominal Force | KN | 2500*2 |
| Return Force | KN | 405*2 |
| Slide stroke | mm | 900 |
| Opening Height | mm | 1400 |
| Hydraulic cushion nominal pressure | KN | 1000*2 |
| Hydraulic cushion return force | KN | 320*2 |
| Hydraulic cushion stroke | mm | 350 |
| The speed of the slipper | Idle stroke | mm/s | 200 |
| pressing | mm/s | 10-24 |
| return | mm/s | 140 |
| Cushion speed | Knock out | mm/s | 60 |
| Return | mm/s | 120 |
| Effective table size | LR | mm | 2200 |
| FB | mm | 1600 |
| Cushion size | LR | mm | 1720 |
| FB | mm | 1120 |
| Overall dimensions | LR | mm | 5000 |
| FB | mm | 2600 |
| Height | mm | 7150 |
| Power of motor | KW | 30*2 |
| Total weight | T | 70 |
tee machine is mainly oil pump, motor, PLC control box, water tank,
the corresponding model mold composition.Tee machine body belongs
to non-standard products, so there is no detailed specifications
and models, we cancustomize the tee machine according to the
customer's request.The diameter of the tee is 21mm-630mm and the
wall thickness is 3mm-20mm.Mechanical tee and ordinary tee function
difference.Mechanical tee is divided into groove mechanical tee and
screw mechanical tee.It can be used to connect branch pipe directly
on the steel pipe, and has many applications on the device of fire
pipe and spray pipe.In demand for diversion or confluence can be
used mechanical tee.
Device method first in the steel pipe with a hole opening machine
hole, and then the mechanical three card hole, hole by the sealing
ring along the wall of the tube.Mechanical tee wire connection and
groove type two.When connecting the three mechanical connections,
the clearance between the three mechanical connections and holes
should be checked.Mechanical tee hole spacing shall not be less
than 1m.
