Diameter 219mm equal diameter carbon steel and stainless steel tee
machine
The whole structure of tee machine is introduced:
(1) the optimization design of the frame fuselage of the tee
machine ensures the strength of the machine. The welding parts
shall be tested nondestructive, and the aging treatment shall be
carried out after welding to ensure the complete
elimination of stress and no deformation in the use of the
equipment.
(2) there are t-shaped slots under the slider and above the work
table for installing the mold.
(3) a dead point lock device is provided on the slider to prevent
the slider from sliding.
(4) the power mechanism is placed on the top of the machine, and
the top of the fuselage is provided with a safety platform
and a fence.
(5) the slide guide is lubricated by non-recovery type automatic
circulating thin oil, and is equipped with oil receiving
box and fault display device.
If you need more introduction and parameters of the tee machine,
you are welcome to consult.
The hydraulic power mechanism of the tee machine is installed above
the fuselage, oil pump, motor, cartridge valve
integration block, fuel tank and other components, the power
mechanism includes oil filtration, cooling, oil temperature
oil level display and other devices.The main oil pump is a constant
power input plunger pump, and the output flow can vary
with the pressure.
Electrical control system of tee machine: tee machine is equipped
with an independent electrical control cabinet, and the
main operation button station is suspended on the fuselage.Tee
machine adopts PLC controller.The tee electromechanical
source is AC380V, the 50HZ control power supply is AC220V, and the
electromagnet power supply of each valve is DC24V.
The tee machine can produce carbon steel, alloy steel, stainless
steel, copper and so on.
| Specification | Unit | TDJ-315 | TDJ-500 | TDJ-1000 | TDJ-1500 | TDJ-2000 | TDJ-4000 |
| Tee OD range | lnch | 1~4 | 3~6 | 4~8 | 8~12 | 10~16 | 20~28 |
Master
cylinder | Normal force | KN | 3150 | 5000 | 10000 | 15000 | 20000 | 40000 |
| Work stroke | mm | 450 | 480 | 610 | 670 | 800 | 1200 |
| Go down speed | mm/s | 60 | 80 | 80 | 80 | 80 | 80 |
| Work forward speed | mm/s | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 |
| Return stroke speed | mm/s | 80 | 100 | 100 | 100 | 100 | 100 |
Side
cylinder | Normal force | KN | 3150 | 5000 | 8000 | 12500 | 18000 | 40000 |
| Work stroke | mm | 300 | 320 | 340 | 360 | 410 | 500 |
| Advance speed | mm/s | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 |
| Return stroke speed | mm/s | 60 | 60 | 60 | 60 | 60 | 60 |
Push-out
cylinder | Normal force | KN | 300 | 400 | 500 | 630 | 1500 | 2000 |
| Work stroke | mm | 300 | 300 | 400 | 450 | 550 | 700 |
Workbench
effective area | Right and left | mm | 550 | 750 | 900 | 1200 | 1400 | 1800 |
| Front and back | mm | 400 | 580 | 800 | 1000 | 1200 | 1500 |
| The max distance from slide block to workbench | mm | 190 | 250 | 370 | 460 | 520 | 650 |
| Center high of side cylinder | mm | 980 | 1100 | 1350 | 1800 | 1900 | 2500 |
| Motor power | KW | 30 | 45 | 74 | 110 | 220 | 330 |
Features:
1. Hydraulic Tee Forming Press/tee making machine has rigid
construction assures highly reliable operation.
2. Adopt Germany technology.
2. Special hydraulic circuit design improve working efficiency.
3. High efficiency and low noise hydraulic system can save energy
and improve working environment.
4. User-friendly touch-screen panel provides easy operation and
trouble-shooting.
5. The Safety inter-lock device assures perfect operator safety.
