The machine can produce carbon steel tee and stainless steel tee with diameter 219mm

1. Product introduction

Tee equipment is mainly able to produce tee pipe fitting equipment, tee machine production of tee mainly have the same diameter and reducing tee, tee shape is divided into T shape and Y shape.Tee machine main production tee material has carbon steel, alloy steel stainless steel and so on.
The main power of the three-way machine is the hydraulic cylinder, the body of the three-way machine belongs to the non-standard products, so there is no specific specifications and models, we can directly customize according to the specific requirements provided by the customer.
First tee machine is the production of tee most advanced mechanical equipment.Tee machine leading technology through the water pressure to squeeze straight pipe into three, reduce lead, repair lead blank drilling, return lead and other technology, save cost and production time, in order to ensure the stability of water pressure, we use a pressure equalizer to stabilize the pressure in the copper pipe squeeze three, is the copper pipe in the extrusion process to maintain a constant pressure.
The company is mainly the production of tee machine most professional manufacturers, professional production and manufacturing of various mechanical equipment.

2. Product parameters

3.

Tee mechanism for the tee process flow
Technological process of tee machine:
Installation preparation → pipeline groove → opening → installation of mechanical tee → pipeline installation → system pressure test.
Tee also known as pipe fittings tee or tee pipe fittings, tee joint and so on.Used chiefly to change the direction of a fluid, as in the main branch of a pipe.Can be classified by pipe diameter size.Generally made of carbon steel, cast steel,alloy steel, stainless steel, copper, aluminum alloy, plastic, argon-tarry, PVC and other materials.
Pipe diameter size division of tee:
The pipe ends of the equal diameter tee are of the same size;
The pipe size of the reducing tee is the same as that of the main pipe,
while the pipe size of the branch pipe is smaller than that of the main pipe.
Tee machine is to make the tee machine, the point here refers to the metal tee, whether it is carbon steel, alloy steel,stainless steel and titanium alloy, we can produce three tee machine.
There are three main kinds of machines for making tee: hot draw tee, hot press tee, cold squeeze tee.The characteristics of the hot draw tee machine are: low cost, but the extracted branch is not high enough, the need to weld a section of steel pipe.The main purpose of this process is to make the tee with larger wall thickness than SCH80.
Cold squeeze tee machine is also the most commonly used way to make tee, now make tee size is, 21mm-630mm, thickness is sch10-scg80, it is characterized by high efficiency, the product rate is low, the price is reasonable, generally a molding.

4. tee machine according to the customer's request.
The diameter of the tee is 21mm-630mm and the wall thickness is 3mm-20mm.Mechanical tee and ordinary tee function difference.Mechanical tee is divided into groove mechanical tee and screw mechanical tee.It can be used to connect branch pipe directly on the steel pipe, and has many applications on the device of fire pipe and spray pipe.In demand for diversion or confluence can be used mechanical tee.Device method first in the steel pipe with a hole opening machine hole, and then the mechanical three card hole, hole by the sealing ring along the wall of the tube.Mechanical tee wire connection and groove type two.When connecting the three mechanical connections, the clearance between the three mechanical connections and holes should be checked.Mechanical tee hole spacing shall not be less than 1m.
The hydraulic power mechanism of the three-way machine is installed above the fuselage, oil pump, motor, cartridge valve integration block, fuel tank and other components, the power mechanism includes oil filtration, cooling, oil temperature oil level display and other devices.The main oil pump is a constant power input plunger pump, and the output flow can vary with the pressure.Electrical control system of tee machine: tee machine is equipped with an independent electrical control cabinet, and the main operation button station is suspended on the fuselage.Tee machine adopts PLC controller.The tee electromechanical source is AC380V, the 50HZ control power supply is AC220V, and the electromagnet power supply of each valve is DC24V.The tee machine can produce carbon steel, alloy steel, stainless steel, copper and so on.

5. Product advantages

Tee Elbow cold forming machine of model YSLT100A could be designed and manufactured for manufacturing equal and reducing tees of sie from 1/2" to 4" with thickness from SCH10 to XXS of stainless steel, carbon steel, alloy steel, monel, nickel alloy, but the normal model just will be designed and manufactured for manufacturing maximum thickness up to SCH80.

Hei Yan Group Covers the following R&D abilities :

1. PLC induction pipe bending machine,
2. Cold forming tee machine
3. Automatic Hot forming elbow machine
4. hydraulic pipe expanding machine
5. Bevel machine
6. Hydraulic press machine.
7. Cold elbow forming machine
8. Bandsaw machine
9. Medium Frequency power source
10. Shot Blast Machine
11. Pipe fittings dies&mandrels
12. Steel pipe fittings