Medium Frequency Power Supply Band Heating Induction Equipment
Features of the our Medium Frequency Power Supply Band Heating Induction Equipment :
• Easy operation:
A full time operator specially for power supply is not needed
.There is only one switch for turning on or off and one power
adjustment knob. After started, the only thing that needs to be
done is rotating the power adjustment knob to the largest location,
others are controlled by the device itself.
• Safety protection functions of induction melting furnace:
1. The main circuit and short circuit protection
2. SCR overvoltage protection
3. Main circuit phase fault protection
4. The main circuit phase loss protection
5. Low water pressure protection
6. SCR overcurrent protection
• Highly reliable electrical control board
In the operation, the 3-phase current is balanced. Due to the
advanced design, the 3-phase power supply's sequence could be
connected randomly. Moreover there is no limit to connect to
capacitor cabinet and furnace. All of these jobs can be judged to
be adapted automatically by the device itself. It makes the
installation and maintenance very easily.
Production Description of Medium Frequency Power Supply Band Heating Induction Equipment
1) Turn on and turn off easily,and power failure.
2) Adopt constant power to control the circuit, maintain constant
power while malting, and keep faster melting rate.
3) Set up over voltage, over current and water deficient protector,
and run safely.
4) The motherboard adopts CAD technology, integrated circuit board,
low-fault-rate, easy-manipulating,effortless maintenance.
5) Zero voltage starts up softly, high initial over, no impact for
the electric network.
6) Apply to melting ferrous metal and non-ferrous metal like
copper, aluminum, brass, steel,iron,stainless steel etc...
Technical Parameter of Medium Frequency Power Supply Band Heating
Induction Equipment:
| Model | Input power(kw) | Semlting capacity(T) | Smelting(T/H) |
| KGPS-50 | 50 | 0 | 0 |
| KGPS-100 | 100 | 1/9 | 1/9 |
| KGPS-160 | 160 | 1/7 | 1/5 |
| KGPS-250 | 250 | 1/4 | 1/3 |
| KGPS-300 | 300 | 2/7 | 3/8 |
| KGPS-400 | 400 | 1/2 | 5/9 |
| KGPS-500 | 500 | 3/4 | 7/9 |
| KGPS-750 | 750 | 1 | 1 |
| KGPS-1000 | 1000 | 1 1/2 | 1 1/2 |
| KGPS-1400 | 1400 | 2 | 2 |
| KGPS-2000 | 2000 | 3 | 2 4/5 |
| KGPS-3000 | 3000 | 5 | 4 2/7 |
| KGPS-4000 | 4000 | 7 | 7 |
| KGPS-4500 | 4500 | 8 | 7 1/2 |
| KGPS-6000 | 6000 | 10 | 10 7/9
|
| KGPS- 100/ 1-8 | KGPS- 160/ 1-8 | KGPS- 250/ 1-8 | KGPS- 350/ 1-8 | KGPS- 500/ 1-8 | KGPS- 750/ 1-8 | KGPS- 1000/ 1-8 | KGPS- 1500/ 1-8 | KGPS- 2000/ 1-8 | KGPS- 3000/ 1-8 |
| Rated output power | 100 | 160 | 250 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3000 |
| IF Frequency (Khz) | 1-8 | 1-8 | 1-8 | 1-8 | 0.4-4 | 0.4-1 | 0.4-1 | 0.4-1 | 0.4-1 | 0.4-1 |
| Rated input voltage (v) | Thress phase 380V 50Hz | Thress phase 660V |
| Rated input current (A) | 180 | 280 | 440 | 610 | 880 | 1310 | 1016 | 1524 | 2032 | 3048 |
| Rated direct voltage (V) | 500 | 870 |
Rated direct Current (A) | 220 | 343 | 539 | 747 | 1078 | 1600 | 1245 | 1867 | 2490 | 3735 |
| Rated output voltage(v) | 700 | 1200 |
| Main D.C.current(A) | 250 | 380 | 550 | 800 | 1100 | 1700 | 1400 | 2000 | 2650 | 3900 |
APPLICATIONS of our Medium Frequency Power Supply Band Heating Induction Equipment:
A. Heating (hot forging, hot fitting and smelting):
B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials
through the heat treatment to work pieces. Detail applications are
stated as follows:
C. Welding (braze welding, silver soldering and brazing)
It mainly aims to melt the solder by heating it to a certain
temperature for the purpose of connecting two types of metals of
the same material and different
D. Annealing (tempering and modulation)
Main control circuit board as the main part of the machine, we made
in their research and development, and adopted by the company and
built since the automatic welding and testing equipment to ensure
that each set of machine can achieve the best effect, and we have
main control board in stock lone time, can satisfy the parts supply
problems.
Induction coils
The induction coil inside the furnace body is treated with two
insulations. The first spray of high temperature insulation paint.
The second round of glass fiber tape. The service life of the
treated furnace lining and induction coil will increase by more
than two times.
