Induction Heating Angel Bends Bending Machine With Automatic
Control System
1. Production Range :OD60---2000mm(2---80 Inches)
2. Radius:1.5D≤R
3. Thickness:2mm--120mm
4. Angle:0--180 degree
5. Material:Carbon steel ,Alloy steel ,Stainless steel ect.
| Max size | Model | Heating power | Cylinder capacity | Thickness |
| 6” | HYG-159 | 200KW | IDΦ140 ODΦ168 | 5-20 |
| 8” | HYG-219 | 200KW | IDΦ140 ODΦ168 | 5-20 |
| 12” | HYG-325 | 250KW | IDΦ180 ODΦ219 | 5-20 |
| 16” | HYG-426 | 350KW | IDΦ180 ODΦ219 | 5-20 |
| 20” | HYG-530 | 400KW | IDΦ180 ODΦ219 | 5-20 |
| 24” | HYG-630 | 500KW | IDΦ200 ODΦ245 | 5-20 |
| 28” | HYG-720 | 600KW | IDΦ200 ODΦ245 | 5-20 |
| 32” | HYG-813 | 800KW | IDΦ220 ODΦ273 | 5-20 |
| 36” | HYG-914 | 800KW | IDΦ250 ODΦ299 | 5-20 |
| 48” | HYG-1220 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
| 56” | HYG-1420 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
| 60” | HYG-1520 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
1. Induction Heating Angel Bends Bending Machine With Automatic
Control System constructed with srtong metal fram with good appearance and stable
functioning
2. It has individual power construction and electrical system,
adopts two kinds of heating methods, high frequency and
intermediate frequency, the speed of pushing could be randomly
adjusted, the speed of adding raw material pipes is fast and the
machine is easy to operate.
Our Induction Heating Angel Bends Bending Machine With Automatic
Control System has following advantages:
1. Main body is strength and durable.
2. Underframe welded with structural steel and steel plate, and
machine milling. Pushing plate using T type groove structure,
travel smoothly. Under the push board with grey iron plate,
wear-resisting. Have wear compensation regulating variable.
3. Bending radius is adjusted by cycloidal motor drive screw rod
adjustment, convenient adjustment, high precision.
4. Hydraulic system uses frequency control, working speed stepless
variable speed, convenient adjustment, improve the production
efficiency, saving energy save electricity. According to the
feeding speed control motor speed, adjust the fuel delivery
accordingly, on-demand oil supply, hydraulic oil without high
pressure unloading, the oil temperature not too high.
5. Rocker arm uses the center boom structure, overcome the twist of
rocker by bend moment, high bending precision, small rotating
resistance, especially suitable for thin wall tube bending.
6. Medium frequency power supply adopts zero pressure startup mode,
high success rate, high heating efficiency, low failure rate. Using
control device, make power output stability: Input line voltage
fluctuation ±15%, the system also can ensure constant power output.
