Press Hot Forming Machine Induction Heating High Efficiency Elbow
Forming Mandrel
Hei Yan Group have been successfully installed 630mm Elbow Mandrel Press Hot Forming Machine For Carbon Steel Elbows-largest one in Indian history.This machine is equipped with
induction heat system,hydraulic control gate,hydraulic system,pump
station.gear motor,making it work stable and efficiently.
The HY Series machinery are designed for customer's point and
needs.Hydraulic Hot Forming Elbow Machine Hot Forming Machine
Making Elbow?has novel structure, safe using, reasonable
price.Welcome to contact us
Characteristics: High speed and no damage for internal structure of
steel
| Elbow size | outer diameter Φ25mm(1″)~Φ1420mm(56″) |
| Wall thickness | 5~120mm |
| Bent diameter | ≤3 |
| Bent degree | 22.5°,45°,90°,135° etc. |
| Hydraulic cylinder | 2/4sets |
Machine composition
| 1. machine base/frame |
| 2. Main cylinder and supporting plate |
| 3. pushing plate |
| 4. front supporting plate |
| 5. loading table |
| 6. induction coils and adjusting device |
| 7. medium frequency power supply |
| 8. electrical control system |
| 9. auxiliary equipment: hydraulic machine/ stamping moulds/pipe end
cutting machine/quality testing machine |
Elbow Mandrel Press Hot Forming Machine For Carbon Steel Elbows can produce butt welded elbows: 1. The range of the size is OD: 1
inch (25mm)- 60 inches (1420mm); Thickness: 5mm – 120mm; Angle:
22.5 degree 45 degree 90 degree 135 degree and the angle of user
needs 2. Butt welded elbow machine is composed by: Hydraulic main
pushing machine, hydraulic pump, operate panel, control panel of
generators, medium frequency, compensating capacitor, water cable,
induction coils adjust frame, reactor.
1. The range of the size is OD: 1 inch (25mm)- 60 inches (1420mm);
Thickness: 5mm – 120mm;
Angle: 22.5 degree 45 degree 90 degree 135 degree and the angle of
user needs
2. Butt welded elbow machine is composed by: Hydraulic main pushing
machine, hydraulic pump, operate panel, control panel of
generators, medium frequency, compensating capacitor, water cable,
induction coils adjust frame, reactor.
3. The following parts shall be ready by customer:
a. cooling system (tank, water pump, water shed, water pipeline low
and above)
b. connection cables
c. hydraulic oil : L-HM anti- wear hydraulic oil
d. heating coils, mandrils according to production scope
e. related machine: press machine, cutting machine for ends of
pipe, elbow testing machine .
